f3.gif (1262 bytes)

Ammattilaiselta
Ammattilaisille
Huomioi! FATTORE Vitale & Co.
ei
 toimi kuluttajamarkkinoilla.

Yritykseltä
Yrityksille

Huomioi! FATTORE Vitale & Co.
ei
 toimi kuluttajamarkkinoilla.

30
 
VUOTTA
1983 - 2013
 

 

 HUOMIOI! Palvelemme klo.: 11:00 - 17:00  perjantaisin 11:00 - 15:00

 

soita aina ½h ENNEN KUIN TULET  

  Osoitekartta

Postiosoite

Sähköposti

Lankapuhelin

 

Käsipuhelin

Faksi

Y-tunnus

Palveluajat

Kuunkierros 3 F
02210 Espoo

 

PL 59
02211 Espoo

 

 

          

     

09 803 94 84     0500 205 819
Soita aina ennekuin tulet

 

09 803 94 21

 

0532156-7

 

Tiedustelulomake
Takaisin etusivulle

 

 
 

Kuukauden erikoistarjous: kosteusmittari!

Ostamalla nyt kosteusmittari HygroPalm 0, erikoistarjouksena, saat kanto/säilytyslaukku samaan hintaan!
 

HygroPalm 0
Kosteus/lämpötila/kastepistemittari

Lisä infoa

  • Käsimittari kiinteällä anturilla
     

  • Täydellinen mittausalue: 0...100%RH
     

  • Lämpötila: -10...60°C
     

  • Standardi 9V paristo
     

  • Näytöllä kosteus ja lämpötila samanaikaisesti

  • Valinnainen kastepistelämpötila tai

  • Märkäsukkalämpötila
     

  • Helppo luettava näyttö
     

  • Yksipistekalibrointi mahdollinen näppäimistön kautta
     

  • Ainutlaatuiset trendinuoliosoittimet
     



  • Kosteuden ja lämpötilamittaussetti
    HygroPalm 2-Setti

 

 



Yksi näistä voisi olla sinun.
Rotronic -laitteiston hankkijalle Rotronic:n maskotti
Rolina
 

palm0123aw600x450_04backr.jpg (72175 bytes)

 HygroPalm 0, HygroPalm 1, HygroPalm 2, HygroPalm 3, HygroPalm Aw1 

HygroPalm-mittarit kuuluvat HygroClip-sarjan tuoteperheeseen,
joka perustuu huipputarkan
digitaalisen HygroClip-anturin käyttöön.
 
Muita perheen laitteitta ovat loggerit, lähettimet, laboratoriolaitteet jne.

Anturivalikoima on laaja: ilmasta, paperista, elintarvikenäytteistä, betonireiästä jne. mittaavia.
Lisäksi
HygroPalm 3:een voidaan liittää minkä tahansa valmistajan analogisia antureita kuten
paine-, paine-ero-, ilmavirtausantureita...

Anturivalikoimassa on huippuantureita, joilla voidaan mitata suhteellista kosteutta
lämpötila-alueella
-50...200°C.
 
Anturien tarkkuus
±1,5%RH koko alueella 0...100%RH (n. huonelämpötilassa) ja
tarvittaessa saatavilla on myös tarkkuus
±1,0%RH koko alueelle 0...100%RH.
 
Kosteusmittauselin sietää kondenssivettä ja jatkaa kuivuttuaan toimintaansa normaalisti.
 
Anturien koot ovat lähtien ø4mm.

HygroPalm Aw1 sisältää elintarvikkeiden/lääkkeiden/yms.
aw-mittauksia huomattavasti nopeuttavan toiminnallisuuden.

 HygroPalm Aw1, HygroPalm 3, HygroPalm 2, HygroPalm 1, HygroPalm 0

palm0123aw600x450_04head.jpg (59081 bytes)

HygroPalm 0:

yksi kiinteä anturi

HygroPalm 1:

yksi anturiliitäntä (DAT05)

HygroPalm 2

kaksi anturiliitäntää (DAT05 ja Binder5) ja RS-232

HygroPalm 3:

kaksi anturiliitäntää (DAT05 ja Binder5) ja RS-232

HygroPalm Aw1:

yksi anturiliitäntä (Binder5)

palm0123aw600x396_02.jpg (72936 bytes)

Kuva 3: kosteusmittarit, kosteusanturit ja tarvikkeet  

Ylärivissä: Rolina -maskotti, PalmDock pöytä-/seinätelakointiasema
(sis. esim. RS-232-liitännän, ulkopuolisen virtaliittimen, avainlukituksen)

Keskirivissä: HygroPalm 0, HygroPalm 1, HygroPalm 2, HygroPalm 3, HygroPalm Aw1,

Датчики и аксессуары
Aw-DIO
aw-mittausasema,

näytekuppeja ja näytealustat,
vaijerianturit ø4mm HygroClip SC04 ja


Ø5mm HygroClip SC05

Alhaalla: HygroClip HS28 miekka-anturi paperipinoille ja HygroClip HP28 pistinanturi.

 



Kosteus- ja lämpötilamittausanturi
HygroClip S

Overview / katsastus

Englanniksi

  1.

red_button.gif (982 bytes) Instruments: Humidity, Dew Point and Temperature
By Rotronic

ROTRONIC offers a comprehensive line of instruments for the measurement of relative humidity, dew point, water activity and other humidity parameters.

Because temperature is critical to the proper measurement and interpretation of humidity, most of our instruments combine the measurement of temperature with that of humidity.

Instruments from ROTRONIC include portable humidity temperature indicators and probes both for general use and for applications such as printing and packaging, humidity temperature data loggers, water activity indicators and probes for quality control of foods, pharmaceuticals and cosmetics, meteorological humidity temperature probes as well as humidity temperature transmitters for HVAC installations, manufacturing applications and process control.

 

ROTRONIC also offer a line of quality temperature measuring instruments.

 

Humidity, Dew Point, Water Activity and Temperature Measurement

 

  2.

red_button.gif (982 bytes) The HygroClip Technology
By Rotronic

Probes based on the HygroClip technology are 100% interchangeable and include two main subsystems:

· ASIC (Application Specific Integrated Circuit): a custom designed chip that measures both the capacitive humidity sensor and the Pt100 RTD and converts the measurements into digital counts.

The ASIC includes two D/A converters to convert the data from the micro controller into analog output signals *.

The ASIC also regulates all supply voltages and generates the reset and clock signals for the micro controller.

* analog output signals are provided only with the
HygroClip S and S3 probes.

All other HygroClip probes   are strictly digital.

Micro controller / EEPROM: uses the digital counts generated by the ASIC to compute the value of humidity and temperature and returns the data to the ASIC (analog outputs).

The micro controller also sends data to, or receives data from, the digital input / output (DIO).

Calibration, linearization, temperature compensation and other sensor data are memorized in the EEPROM.

The HygroClip digital technology offers the following benefits:

Higher Accuracy:

  • accurate linearization of the sensors over the entire range of measurement

  • multiple calibration points

  • temperature compensation of the humidity sensor over the full operating range

Digital Signal Processing:

  • potentiometer-free calibration without opening the probe

  • direct use of the digital output results in reliable data transfer and eliminates intermediate analog circuits

  • digital signal has high resolution: up to 0.004%RH and 0.004°C

  • added flexibility for humidity computations such as dew point, networking, data recording, unit conversions, etc.

No Down Time:

  • each HygroClip probe is 100% interchangeable because calibration and other data are stored in the non-volatile memory of the probe.

  • HygroClip probes can be swapped in seconds without any loss of accuracy and without requiring any calibration.

  • products based on the HygroClip do not have to be returned to the factory for routine calibrations or for probe repairs.

 

  3.

red_button.gif (982 bytes) The HygroClip Exchange Program 
By Rotronic 
The interchangeability of the HygroClip probes means economical, faster and hassle free service.

In most instances, there is no requirement of having to return the entire instrument to the factory.

Maintaining a small stock of spare HygroClip probes is inexpensive and can rapidly pay for itself by eliminating down time.

If you do not wish to go through routine maintenance calibrations, or if the HygroClip probe needs replacement, use the unique HygroClip exchange program.

To use the exchange program all you have to do is return your HygroClip probe (not the the complete instrument) together with a PO for a reconditioned replacement probe. Replacement probes are inexpensive, fully calibrated and always contain a new humidity sensor and dust filter.

Of course, you always have the option to calibrate your HygroClip probe in-house with the ROTRONIC software and accessories.

 

 

  4.

 HW3 Software - Overview
By Rotronic

HW3 is a software package designed for the HygroClip product line.

HW3 features data acquisition, recording, graphing and alarm functions, calculation of various humidity parameters (both on-line and off-line) as well as instrument configuration and probe calibration.

HW3 also offers a comprehensive solution for the networking of up to 32 HygroFlex transmitters and / or HygroLab bench top indicators.

More details are provided in the different sections of this web site.

 

 

Tiedonkeruulaiteet Ethernet:llä

FATTORE Vitale & Co.

jo vuodesta 1983!

 

HygroLog_NT3-small.jpg (6165 bytes)

HygroLog NT Dataloggeri
Rotronic FDA-hyväksytty loggeri


Täyttää FDA CFR 21 11
  • Integroitu (sisäinen) tai vaihdettavat anturit
  • Graafinen näyttö
  • FlashCard -muistin lähes rajoittamaton kapasiteetti
  • Verkkoon kytkettävissä
  • Telakointiasemat lisäantureille yms...
  • Kaikki nykyiset HygroClip -anturimallit sopivat
  • Sveitsiläinen huippulaatu
  • Windows-ohjelma ja RS-232, USB tai Bluetooth
     
    Esite HygroLog NT

     
    Datasheet HygroLog NT
    hygrolognt_400x533_backr.jpg (45698 bytes)

 ROTRONIC-TUOTTEET

ROTRONIC Index B

 

Rotronic USA 

 Rotronic On Line   http://www.rotronic.com

Tutustu myös ROTRONIC -yhteistyökumppanimme
mielenkiintoisiin web-sivuihin

Sveitsissä Saksassa Ranskassa Englannissa ja USA:ssa

 

 

 

 


ROTRONIC

Painoit
HygroClip2

Kosteuden mittaava anturi
HygroClip 2

ROTRONIC - a probe revolution 

vallankumouksellinen anturi!

Bassersdorf (Switzerland), 6 May 2008 – ROTRONIC, based in Switzerland, has extended its leadership in humidity and temperature measurement with the introduction of the
HygroClip 2.

The new HygroClip 2, the second generation of the HygroClip family, is reaching a level of performance not seen before in the field of humidity measurement.  

The AirChip3000 – the new standard in humidity measurement

The AirChip3000 forms the core of the new HygroClip 2.

The AirChip 3000 capabilities include the compensation of humidity and temperature at 30,000 reference points, the recording of 2000 data points, and the calculation of dew point.


 Our standard and most cost effective probe for the measurement of humidity and temperature in air using handheld instruments, dataloggers or transmitters.

Fully interchangeable with a digital output to
ROTRONIC products such as the HygroPalm handheld and HygroFlex transmitters.
 
The
HygroClip2-S also has two analogue 0...1V output signal for OEM or datalogging applications.


The AirChip 3000 - a probe with active intelligence

The AirChip3000 can do even more, including self-diagnostics.

If sensor accuracy declines significantly, the AirChip 3000 recognises the problem and will issue an alarm.

It also combines within itself an ASIC (Application Specific Integrated Circuit), a micro-controller and a non-volatile, electronic memory (EEPROM).

 
Uusin kosteus-lämpömittari muistilla
HygroPalm HP21

ROTRONIC

The new sensor technology

Combined with the new technology of the AirChip3000, ROTRONIC has further improved the humidity sensor.

  Today, the HygroClip 2 provides reproducibility and a guaranteed system accuracy of < 0.8 % r.h. and 0.1°C. 

In addition, response time has been significantly improved, and new filter technology provides even better protection for the sensor against environmental influences.

 

Combining all of these features with an operating range of up to 200°C provides a level of performance no other humidity sensor in the world can equal.


Versatile

Of course, the HygroClip 2 is suitable for use with all ROTRONIC products - from handhelds, transmitters and data loggers to the meteo probe.

As our product development moves forward, the HygroClip 2 will be integrated in all of our products.  

For OEM customers the analog, freely scaleable signals and the UART interface, provide an easy path to integration into any system.  

Still a guarantee: Swiss Made

All of this combined makes the HygroClip 2 the best humidity product on the market today, and one that currently also has no competition in terms of quality and longevity.

 
ROTRONIC-HygroClip2 and the AIRCHIP 3000

ROTRONIC, based in Switzerland, has extended its leadership in humidity and temperature measurement with the introduction of the HygroClip 2.

The new HygroClip 2, the second generation of the HygroClip family, is reaching a level of performance not seen before in the field of humidity measurement.
read more

 

ROTRONIC 2009 Catalog

ROTRONIC  2009-2010 catalog

The complete range of ROTRONIC's humidity measuring equipment is now available with our new catalog.

Particular mention must be made to the launch of the HygroClip2 and AirChip 3000.
read more

ROTRONIC HygroPalm21/22

Kosteus/lämpötilamittari
ROTRONIC HygroPalm21/22
 
The HygroPalm21/22 –series represents a new generation of portable humidity/temperature instruments utilizing the very latest AIRCHIP3000 technology achieving a degree of accuracy not seen before.

The HygroPalm is a highly accurate hand-held indicator that displays relative humidity, temperature and dew point
read more

 

ROTRONIC - HygroFlex4

Kosteus/lämpötilalähetin
ROTRONIC - HygroFlex4
 
The new HygroFlex 4-series is the latest development in HVAC transmitters for relative humidity, temperature and dew point.

Based on AirChip3000 technology, the instruments achieve a degree of accuracy not seen before.

The industry leading innovations include:

read more

 

ROTRONIC HYGROFLEX 3

Kosteus/lämpötilalähetin
ROTRONIC HYGROFLEX 3
 
The ROTRONIC HygroFlex 3
is the newest product from ROTRONIC using the groundbreaking
HygroClip2 with AirChip 3000 technology.

The industry leading innovations include:

  • Unmatched accuracy of ±2%RH and 0.3°C
     
  • Relative humidity, temperature measurement & dew point calculation
     
  • Outstanding accuracy and repeatability
    read more

 

ROTRONIC HygroFlex5 Humidity & Temp Transmitter

ROTRONIC HygroFlex5 Humidity & Temp Transmitter

 

ROTRONIC'S new HygroFlex5-series is the latest development in transmitters for humidity, temperature and dew point.

The HygroFlex 5-series is ideal for all applications where exact measurement of humidity and temperature is of decisive importance, e.g. the food and pharmaceutical industries, printing and paper industries, meteorology, agricultural sector, archaeology, climatology, etc.
read more

 

ROTRONIC - HygroMer Humidity Sensor

Kosteusmittauselimet
ROTRONIC - HygroMer Humidity Sensor

The new HygroMer humidity sensors from ROTRONIC.

ROTRONIC, based in Switzerland, has significantly improved the HygroMer humidity sensor family to meet new market requirements by incorporating new materials and production processes.

The result is impressive: improved long term stability, improved resistance to chemical contaminants, and the HygroMer-Humidity Sensor is the only humidity sensor probe that can operate in temperatures up to 200 °C.

ROTRONIC launched the first capacitive sensor to the market in 1980.

Capacitive sensors have proven over the years to be well suited for measuring humidity.

In electrical terms their configuration is relatively simple: a polymer, sandwiched between two electrodes, that changes its electrical properties based on the water vapour present, forming a variable capacitor.

The electrodes are intentionally designed so that the water molecule can pass through to equilibrium with the polymer.

New sensors have been developed and added to the HygroMer sensor family.

These sensors handle rougher applications than is possible with current sensors.

With these additional new sensors, ROTRONIC is now able to offer application-specific products with the ideal sensor.

If rapid sensor response time is a requirement for a particular application, ROTRONIC has the suitable sensor.

If the sensor is subjected to high humidity levels for a long period, ROTRONIC has the suitable sensor.

If H2O2 is used in sterilisation applications, ROTRONIC has the suitable sensor.

New polymers and materials, together with new processing methods, have made the proven HygroMer humidity sensor even better.

For more detailed information and printable illustrated material, visit our Web site.

The new HygroMer humidity sensors

ROTRONIC, based in Switzerland, has significantly improved the HygroMer humidity sensor family to meet new market requirements by incorporating new materials and production processes.

The result is impressive: improved long term stability, improved resistance to chemical contaminants, and the HygroMer-Humidity Sensor is the only h...
 

 

ROTRONIC HygroPalm21/22 ROTRONIC-HygroClip2 and the AIRCHIP3000

 

2009 AHR EXPO Innovation Awards Competition

2009 AHR EXPO Innovation Awards Competition
 
The prestigious 2009 AHR EXPO Innovation Awards Competition represents the best submissions from the thousands of products on display at the 2009 AHR EXPO
www.ahrexpo.com

Honorees span the industrial marketplace in a total of nine product categories ranging from the latest developments in Green technology to the newest building automation tools.

The prestigious 2009 AHR EXPO Innovation Awards Competition represents the best submissions from the thousands of products on display at the 2009 AHR EXPO

Honorees span the industrial marketplace in a total of nine product categories ranging from the latest developments in Green technology to the newest building automation tools.

Rotronic was awarded the winner in the category of Indoor Air Quality with our product the HygroClip2 humidity and temperature probe.

ROTRONIC, based in Switzerland, has extended its leadership in humidity and temperature measurement with the introduction of the HygroClip 2.

The new HygroClip 2, the second generation of the HygroClip family, is reaching a level of performance not seen before in the field of humidity measurement.

The AirChip 3000 – the new standard in humidity measurement

The AirChip 3000 forms the core of the new HygroClip 2.

The AirChip 3000 capabilities include the compensation of humidity and temperature at 30,000 reference points, the recording of 2000 data points, and the calculation of dew point.

The AirChip 3000 - a probe with active intelligence

The AirChip 3000 can do even more, including self-diagnostics.

If sensor accuracy declines significantly, the AirChip 3000 recognizes the problem and will issue an alarm.

It also combines within itself an ASIC (Application Specific Integrated Circuit), a micro-controller and a non-volatile, electronic memory (EEPROM).

The new sensor technology

Combined with the new technology of the AirChip 3000, ROTRONIC  has further improved the humidity sensor.

Today, the HygroClip 2 provides reproducibility and a guaranteed system accuracy of < 0.8 % RH. and 0.1°C.

In addition, response time has been significantly improved, and new filter technology provides even better protection for the sensor against environmental influences.

Combining all of these features with an operating range of up to 200°C provides a level of performance no other humidity sensor in the world can equal.

Rotronic Instrument Corp. - 2009 AHR EXPO Innovation Awards Competition

Versatile

Of course, the HygroClip 2 is suitable for use with all ROTRONIC products - from handhelds, transmitters and data loggers to the meteo probe. As our product development moves forward, the HygroClip 2 will be integrated in all of our products.

For OEM customers the analog, freely scaleable signals and the UART interface, provide an easy path to integration into any system.

Still a guarantee: Swiss Made

All of this combined makes the HygroClip 2 the best humidity product on the market today, and one that currently also has no competition in terms of quality and longevity.

For more detailed information and printable illustrated material, visit our Web site:

www.rotronic-usa.com

Contact partner for press:

Rose Mannarino

rose@rotronic-usa.com

For more detailed information and printable illustrated material, visit the  SwissWeb site:
www.rotronic-humidity.ch

 

ROTRONIC

 - Your competent partner for all matters relating
to all aspects of humidity and temperature measurement.
 

For 40 years, ROTRONIC has been combining technical innovation with Swiss quality.

The new HygroClip 2, with its integrated AirChip 3000, is setting new standards in terms of accuracy, operating range and OEM flexibilty.

ROTRONIC sells their products worldwide in 40 countries and has branches in the USA, Germany, Great Britain, France, Taiwan, Singapore and China.

In Finland you'll find all ROTRONIC  instruments  from

FATTORE Vitale & Co.
Distributor of
ROTRONIC  products from 1983!

Humidity & Temperature Measurement

HygroClip Probes


 

HygroClip® is a high quality probe for the measurement of humidity and temperature, with digital and analogue output signals
Overview HygroClip Probes

 

Transmitters

ROTRONIC industrial transmitters are robust, high quality products designed specifically for demanding commercial and industrial applications.
Overview Transmitters

 

Handheld Instruments

Rotronic handheld instruments are highly accurate and very easy to use and maintain.
They are suitable for many different applications.

Overview Handheld Instruments
 

Data Loggers


ROTRONIC data loggers provide valuable information on the climate conditions, which may have a significant impact on people, material and objects
Overview Data Loggers


Meteorology


Our meteorolgy probes are robust high quality products, developed for demanding applications and a long lifetime.
Overview Meteorology

 

 

New ProductsV2.ppt