Common Accessories and Parts FATTORE Vitale & Co.:n varastotuotteet
Note: for items such as probes, cables, etc., see the individual product pages
Calibration
devices and humidity standards
ERV-15
Calibration device. Use for calibrating the following probe:
HygroClip IW probe
ER-15
Calibration device. Use for calibrating the following probes:
HygroClip
S
HygroClip S3
HygroClip IC-1 and IC-3
HygroClip IM-1 and IM-3
HygroClip HK25 and HK40
HygroPalm 0
H290 humidity transmitter
All models with a 15 mm (0.6") diameter probe
ER-05
Calibration device. Use for calibrating the following probes:
HygroClip IC-05
HygroClip SC-05
HygroClip SP-05
EM25
Calibration device. Use for calibrating the following probe:
MP101A.
EGL
Calibration device. Use for calibrating the following probes:
HygroClip HP-28
PM1 indicating probe
EGS
Calibration device. Use for calibrating the following probes:
HygroClip HS-28
PS1 indicating probe
EM-G
Calibration device. Use for calibrating the following probe:
HygroClip IE-3
EAxx-SCS
Humidity standard, SCS certificate, pack of 5
Calibration
cables, software and probe simulators for loop validation
MOKX-03-WIN
Probe calibration cable, length 3 m (9.8 ft), includes 115 VAC / 9 VDC
adapter to power the probe and cable electronics.
Connects the HygroClip probe
(models with 5-pin DAT05 connector only) to the COM port of a PC.
Requires the HW3 software.
T7-03-WIN
Probe calibration cable, length 3 m (9.8 ft), includes 115 VAC / 9 VDC
adapter to power the probe and cable electronics.
Connects the HygroClip probe
(models with 7-pin T7 connector only)
to the COM port of a PC. Requires the HW3 software.
HW3
Software package on a CD ROM. Requires Windows
based PC.
HCLPS-xxH/xxC
Probe simulator, 5-pin DAT05 connector
Provides fixed humidity and temperature values
AC1618/XX
Probe simulator, 7-pin T7 connector.
Provides fixed humidity and temperature values
Sample cup holders and
disposable sample cups for water activity measurement
WP14
Sample cup holder (small)
Compatible with PS14 disposable cups
WP40
Sample cup holder (large)
Compatible with PS40 disposable cups
PS14
Pack of 100 disposable sample cups 14 mm deep
PS40
Pack of 100 disposable sample cups 40 mm deep
Mounting adapter for
through-wall probe installation
QMA-15
Mounting adapter, includes flange and compression fitting. Use for
through-wall installation of:
HygroClip IC-3 and IM-3 probes
M22D transmitter
M33D transmitter
Filters
BG15
Complete filter, includes stainless steel body and replaceable wire mesh
cartridge
Standard filter for:
HygroClip IC-1 and IC-3 probes
HygroClip IM-1 and IM-3 probes
HygroClip IE3 probe
HygroClip HK25 and HK40 probes
SP-G15
Replacement wire mesh cartridge for BG15 filter
BF15
Complete filter, includes stainless steel body and replaceable Teflon
cartridge
Fits same probes as BG15
SP-F15
Replacement Teflon cartridge for BF15 filter
BS15
Complete filter, includes stainless steel body and replaceable sintered
steel cartridge
Fits same probes as BG15
SP-S15
Replacement sintered steel cartridge for BS15 filter
MF25-MP
Complete filter, includes collar and Teflon cartridge. Standard filter
for:
MP101A probes
PE15
Black plastic slotted cap with non-replaceable Polyethylene filter insert.
Standard filter for:
F series wall mount
PE15G
Gray plastic slotted cap with non-replaceable Polyethylene filter insert.
Standard filter for:
Roline L series
D15G
Black plastic slotted cap with non-replaceable wire mesh filter insert.
Standard filter for:
HygroClip S probe
F series duct mount
D15G-White
White plastic slotted cap with non-replaceable wire mesh filter insert.
Standard filter for: